Custom Solenoids and Valve Solutions
With engineers and operators on both sides of the globe, TLX has the talent, tools, and technology needed to make the best custom solenoids on the market.
Proportional Canister Purge Valve
A pulse-width-modulated, normally closed, two-port proportional solenoid valve.
3-Way Switching Valve
A thermal management control with three ports that brings together critical performance characteristics and flexibility to suit multiple mobility platforms.
4-Way Switching Valve
A thermal management control valve with four ports that brings together critical performance characteristics and flexibility to suit multiple mobility platforms.
Solenoid Pinch Valve
Accommodates tube sizes up to 10 mm in diameter in the same size valve body and closes with enough force to completely stop fluid flow.
Explosion-Proof Actuator with Supervision
UL HazLoc, ATEX, and IECEx certified for use in hazardous gas environments. Accommodates systems with operating pressures up to 300 bar.
High-Pressure Supervised Direct-Acting Solenoid Valve
This solenoid valve is designed for gas and hybrid systems with operating pressures up to 300 bar and features fully engaged installation detection.
High-Pressure Supervised Latching Actuator
For fire suppression systems with operating pressures up to 300 bar and is compatible with CO2 systems. Meets regulatory standards for supervision.
Discrete Proportional Valve System
Uses only a short pulse of power to actuate and does not require constant power to maintain state.
Peak and Hold Control Module
The peak and hold control module allows any-size solenoid to operate at a higher force without overheating the coil.
High-Flow Discrete Proportional Valve
Designed to support applications with high flow rates at pressures up to 60 psi, with customizable flow characteristics.
Bistable Latching Solenoid
This light-duty solenoid uses only a short power pulse to actuate the armature and maintains position without constant power.
Digital High-Speed Control Valve
A digital valve that was designed to control outlet flow for high-pressure gas vessels.
Low-Profile Latching Solenoid Lock
A two-position latching solenoid lock that drew no current to maintain either a locked or unlocked status.
Increased Force Supervised Latching Actuator
For fire suppression systems with mid-range operating pressures. Meets regulatory standards for supervision.
Supervised Direct-Acting Solenoid Valve
This solenoid valve is designed for gas and hybrid systems with operating pressures up to 150 bar and features fully engaged installation detection.
Supervised Latching Solenoid Actuator
This patented actuator accommodates systems with lower operating pressures and meets regulatory standards for supervision.
Proportional Pneumatic Control Valve
Pulse-width-modulated flow control that was configured for specific pressure/vacuum ranges.
Latching Diaphragm Solenoid Valve
A battery-operated valve that used water pressure to open and close.
Long-Stroke Latching Solenoid
This latching solenoid needs no power to hold in either position and runs efficiently on 4 AA batteries.
Proportional Pressure Relief Valve
This direct-acting, normally open, proportional pressure relief valve can be designed to operate over various pressure ranges.
Coolant Control Valve
A continuous-duty, normally closed valve with a maximum flow rate of 0.5 L/s.
Solenoid Vent Valve
A normally closed, three-way valve with an integrated check valve.
Compact Latching Solenoid
A fully encapsulated solenoid that used only a short pulse of current to actuate and drew no current to maintain state.
D-Frame Solenoid
This solenoid designed to work in the air intake stream of a vehicle and can be designed as a constant current or latching solenoid.
Three-Way Proportional Pressure Reducing-Relieving Valve
This proportional solenoid valve is a direct-acting, normally open, continuously variable pressure relief valve.
Proportional Solenoid Actuator
This proportional solenoid actuator (used to power proportional hydraulic valves in off-highway applications) is direct-acting and continuously variable.
Proportional Pressure Reducing Relieving Valve
This continuously variable pressure reducing relieving valve can be designed to operate over various pressure ranges to optimize controllability.
Atomic Layer Deposition Pilot Valve
A two-position, three-way pilot valve with an ultrafast response and a compact design.
Three-Position Push/Pull Solenoid
This continuous duty solenoid’s armature had three positions: centered, fully extended, or fully retracted.
Magnetic Locking Solenoid
Latching solenoids provide an excellent solution for applications requiring a fast response time and low power consumption.
Manual Reset Latching Solenoid
This solenoid does not need constant power to maintain position, releases quickly when activated, and remains in the released position until manually reset.
Miniature Latching Solenoid
Miniature solenoids provide options for applications with limited space or size constraints.
Latching Solenoid with Burst Pin
The latching solenoid is designed for fire suppression systems that require high force to penetrate a burst disc.
Miniature U-Frame Solenoid
This example of a continuous duty solenoid is miniature in size but with a relatively long stroke and high force.
Bidirectional Latching Solenoid
This solenoid’s low power consumption and compact design made it ideal for battery-operated applications.
Open Frame Latching Solenoid
A low-cost, compact, mechanically simple design that provided reliable performance and energy efficiency.
Heavy-Duty Latching Solenoid
This solenoid example utilizes a 100 ms pulse to latch and hold in position using a permanent magnet.
Intrinsically Safe Latching Solenoid
This latching solenoid featured high-speed plunger extension and was designed for safe use in flammable environments.
Large Latching Solenoid
This latching solenoid uses inherent residual magnetism or permanent magnets to maintain either of its positions without consuming power.
Pressure Release Solenoid Valve
This solenoid valve example is used for applications needing to quickly reduce pressure within an enclosed cavity or transmit fluid to another passage.
Pull Type Locking Solenoid
This example of a continuous duty solenoid remains in the locked position utilizing no power.
High-Speed Dispensing Valve
This is an example of a high-speed solenoid mated to a multiple port spool configuration for the control of output fluids to very fine parameters.
Miniature Solenoid Air Valve
A small solenoid valve that was suitable for low-pressure applications.
Residual Magnetism Latching Solenoid
This solenoid example is a linear on-off design with a built-in latching feature that holds the solenoid in position using residual magnetism.
Three-Position Latching Solenoid
This solenoid’s armature had three positions: fully extended, centered, or fully retracted.
Latching Solenoid
Uses only a short power pulse to actuate and maintains position without constant power.
Miniature Manual Reset Latching Solenoid
A small latching solenoid that had to be manually latched.
Are you designing the technology of tomorrow?
Start your conversation with a TLX engineer today.
