March 1, 2021
Custom Solenoids and Valves for Latching Applications
Solenoids and solenoid valves capable of holding in any position (up to three positions) without the constant application of electrical current utilize latching technology. Latching technology is well suited for battery-operated applications.
Discrete Proportional Valve System
Uses an intelligent combination of simple binary (ON/OFF) solenoid valves with varied port size to achieve stepped proportional control.
Low-Profile Latching Solenoid Lock
This two-position, latching solenoid lock offers zero power consumption in both the engaged and disengaged position.
High-Pressure Supervised Latching Actuator
This actuator accommodates systems with operating pressures of up to 300 bar and features fully-engaged installation detection.
Increased Force Supervised Latching Actuator
This actuator accommodates systems with operating pressures of up to 80 bar and features fully-engaged installation detection.
Supervised Latching Solenoid Actuator
This actuator accommodates systems with operating pressures of up to 35 bar and features fully-engaged installation detection.
Long-Stroke Latching Solenoid
This latching solenoid needs no power to hold in either position and runs efficiently on 4 AA batteries.
Latching Solenoid with Burst Pin
This latching solenoid example was designed to replace pyrotechnic burst devices in fire suppression systems.
Miniature Latching Solenoid
Miniature solenoids provide options for applications with limited space or size constraints.
Manual Reset Latching Solenoid
This solenoid utilizes zero power to hold position, releases quickly when activated, and remains in position until manually reset.
Magnetic Locking Solenoid
Latching solenoids provide an excellent solution for applications requiring a fast response time and low power consumption.
Miniature U-Frame Solenoid
This example of a continuous duty solenoid is miniature in size but with a relatively long stroke and high force.
Bi-Directional Latching Solenoid
The compact design and low power consumption of this latching solenoid example makes it well suited for battery operated applications.
Large Latching Solenoid
This latching solenoid uses inherent residual magnetism or permanent magnets to maintain either of its positions without consuming power.
Intrinsically Safe Latching Solenoid
This latching solenoid example features a high-speed "extend" operation and is an excellent solution for highly flammable or combustible environments.
Heavy Duty Latching Solenoid
This solenoid example utilizes a 100 ms pulse to latch and hold in position using a permanent magnet.
Open Frame Latching Solenoid
The compact design and low cost construction of this open frame latching solenoid allow for flexibility in a variety of applications.
Miniature Solenoid Air Valve
This example of an ultra small solenoid air valve is suitable for a variety of low pressure applications.
Three-Position Latching Solenoid
This latching solenoid is an example of a three-position device with spring center and latch to end positions.
Residual Magnetism Latching Solenoid
This solenoid example is a linear on-off design with a built-in latching feature that holds the solenoid in position using residual magnetism.
This latching solenoid example is spring returned to the de-latched position by providing a short, reverse polarity pulse cancelling the permanent magnet.
February 18, 2021
January 5, 2021
August 21, 2020
February 26, 2020