Keeping EVs Cool with TLX’s Modular Valves
October 8, 2026
Custom Solenoids and Valves for Off-Highway Applications
Engineers at OEMs and system suppliers for heavy vehicle systems trust TLX to meet increased environmental standards with high durability, safety, and performance requirements.
Solenoids and Valves
Proportional Canister Purge Valve
A pulse-width-modulated, normally closed, two-port proportional solenoid valve.
3-Way Switching Valve
A thermal management valve with three ports designed for use across multiple applications.
4-Way Switching Valve
A thermal management valve with four ports designed for use across multiple applications.
Discrete Proportional Valve System
Uses only a short pulse of power to actuate and does not require constant power to maintain state.
Peak and Hold Control Module
The peak and hold control module allows any-size solenoid to operate at a higher force without overheating the coil.
High-Flow Discrete Proportional Valve
Designed to support applications with high flow rates at pressures up to 60 psi, with customizable flow characteristics.
Digital High-Speed Control Valve
A digital valve that was designed to control outlet flow for high-pressure gas vessels.
Proportional Pneumatic Control Valve
Pulse-width-modulated flow control that was configured for specific pressure/vacuum ranges.
Proportional Pressure Control Valve
A direct-acting pressure control valve with a low pressure differential at standby.
Coolant Control Valve
A continuous-duty, normally closed valve with a maximum flow rate of 0.5 L/s.
Solenoid Vent Valve
A normally closed, three-way valve with an integrated check valve.
Three-Way Proportional Pressure Reducing/Relieving Valve
A normally open, continuously variable valve with a low pressure differential at standby.
Proportional Solenoid Actuator
A direct-acting, continuously variable solenoid actuator.
Proportional Pressure Reducing/Relieving Valve
A normally open, continuously variable valve with a low pressure differential at standby.
Additional Resources
Controlling Hydraulic Pressure in an Off-Highway Application
TLX developed two electromechanical solutions that produced more force in a smaller package size than existing solutions.
Designing a Flexible Valve Concept
TLX Technologies responded to new market demands by developing a modular valve product family for thermal management applications.
A Valve for Off-Highway Vehicle Operator Comfort
TLX Technologies developed a continuous duty, three-way valve for the driver’s seat air suspension system.
Are you designing the technology of tomorrow?
Start your conversation with a TLX engineer today.
