Custom Solenoids and Valves for Automotive
With engineers and operators on both sides of the globe, TLX has the talent, tools, and technology needed to make the best custom solenoids on the market.
Peak and Hold Control Module
The peak and hold control module allows any-size solenoid to operate at a higher force without overheating the coil.
Discrete Proportional Valve System
Uses an intelligent combination of simple binary (ON/OFF) solenoid valves with varied port size to achieve stepped proportional control.
Digital High-Speed Control Valve
High-speed digital control valve adapted to control outlet flow of high-pressure gas vessels.
Proportional Pneumatic Control Valve
This pneumatic control valve was designed to meter inlet and outlet pressure to proportionally control an actuator.
Coolant Control Valve
This fluid valve originally designed to control coolant can be used with a variety of mediums including: coolant, water and chemicals.
Solenoid Vent Valve
Normally closed, three-port solenoid vent valves designed with a zero leakage rate and a minimum life of 120,000 cycles.
This solenoid designed to work in the air intake stream of a vehicle and can be designed as a constant current or latching solenoid.
Three-Way Proportional Pressure Reducing-Relieving Valve
This proportional solenoid valve is a direct-acting, normally open, continuously variable pressure relief valve.
Canister Proportional Purge Solenoid Valve
This example of a pulse width modulated, proportional flow control solenoid valve is used in a vehicle's emission control system.
Proportional Solenoid Actuator
This proportional solenoid actuator (used to power proportional hydraulic valves in off-highway applications) is direct-acting and continuously variable.
Proportional Pressure Reducing Relieving Valve
This continuously variable pressure reducing relieving valve can be designed to operate over various pressure ranges to optimize controllability.
Miniature Latching Solenoid
Miniature solenoids provide options for applications with limited space or size constraints.
Pressure Release Solenoid Valve
This solenoid valve example is used for applications needing to quickly reduce pressure within an enclosed cavity or transmit fluid to another passage.
Three-Position Latching Solenoid
This latching solenoid is an example of a three-position device with spring center and latch to end positions.
Residual Magnetism Latching Solenoid
This solenoid example is a linear on-off design with a built-in latching feature that holds the solenoid in position using residual magnetism.
This latching solenoid example is spring returned to the de-latched position by providing a short, reverse polarity pulse cancelling the permanent magnet.