Securing Expensive Lecture Hall Equipment
TLX Technologies designed a key-fob-controlled system that included pull-type solenoids for locking and unlocking computer desks.
Skip to Results
Filters
Types
Case Studies
Latching Technology Used to Isolate Power Faults
This robust, manually resettable latching solenoid was designed to actuate the fault interrupter in pad-mounted switchgear.
A Solenoid Designed as a Security Device
TLX Technologies developed a low-cost bidirectional solenoid to prevent theft of computer hardware.
A Solenoid Valve for a Motorcycle Engine
TLX Technologies designed a pressure-release valve to automatically reduce compression during engine startup.
Valves at Work in SCR Systems
TLX Technologies developed a coolant control valve to keep DEF (diesel exhaust fluid) within its optimal temperature range.
A Compact, Battery-Powered Solenoid
TLX developed a low-cost, battery-operated latching solenoid to open and close a low-pressure gas valve.
A Three-Position Solenoid for an EVAP System
TLX Technologies designed a three-position push/pull solenoid for an automotive OEMs’ charcoal canister vent valve.
A Fast, Accurate Valve for Packaging Equipment
TLX Technologies designed a high-speed dispensing valve to apply adhesives for sealing consumer product packages.
Using Solenoids to Make Vehicles Safer
TLX designed a circuit-board-mountable solenoid to help calibrate an infrared camera on a forward collision warning system.
An Ultrafast Valve for Atomic Layer Deposition Applications
TLX developed a two-position, three-way pilot valve tailored specifically for ALD applications.
