Solenoids for Motorcycle Engines
A manufacturer needed an automatic compression release valve for a motorcycle engine. TLX Technologies designed a solenoid valve that met all the requirements and reduced total vehicle cost.
A manufacturer needed an automatic compression release valve for a motorcycle engine. TLX Technologies designed a solenoid valve that met all the requirements and reduced total vehicle cost.
Diesel engine manufacturers are utilizing Selective Catalytic Reduction (SCR) technology to meet more stringent emissions regulations. These SCR systems use diesel exhaust fluid, better known as AdBlue®, injected into the exhaust stream to create a chemical composition that changes the exhaust into a mixture of nitrogen and oxygen.
A manufacturer required a compact solenoid actuator to operate a low pressure gas valve in an outdoor patio heater. A custom open frame latching solenoid provided the compact design while using almost no power, making it ideally suited for battery operation.
An automotive company needed a solution to open and close the valve in their fuel vapor recirculation system. TLX Technologies designed an effective three-position solenoid.
An automobile manufacturer wanted to add an infrared camera to a vehicle detection device. The solenoid was designed to move a calibration flag over the lens.
A manufacturer was experiencing increased maintenance costs and downtime due to unreliable valves on their product packaging equipment. TLX Technologies designed a high-speed, high temperature solenoid valve with fast response and high repeatability.
TLX developed a two-position, three-way pilot valve with performance tailored for ALD applications, including ultra-fast response, high operating temperature and compact design.
A manufacturer wanted its heavy-duty fluid sprayers to automatically stop pumping when they lost fluid. The solution needed to take precautions against fire and explosion.
A manufacturer of automobile door lock systems needed to add an emergency lock release feature to their passive entry door lock system. TLX Technologies designed a three-position latching solenoid that would perform all the functions of an automobile door lock system, including an emergency release feature.